Skip to content
← Back to home
Render of the Watergen Genny+, a white air-to-water generator with a round display.

Homes, condos and apartments

Watergen Genny+

The Genny+ is perfect for homes, condos and apartments: a sleek, compact and ultra-quiet air-to-water generator built for modern living. It makes up to 20 litres (5.3 gallons) of purified, mineralized drinking water a day, depending on the weather, with no pipes, no plastic bottles and no compromise: just plug it in and drink.

Message on WhatsApp

From air to glass

The Genny+ needs no plumbing: it takes in the room's air, turns it into water and treats it in several stages before serving it.

  1. Air filter

    Air comes in through the back and passes a sub-micron barrier filter, which holds back dust and particles smaller than 2.5 microns before they reach the parts inside.

  2. Condensation

    The GENius™ heat-exchange core, the same one used in Watergen's industrial machines, chills the air and turns its humidity into liquid water.

  3. Tank with UV light

    The water drips into a stainless steel tank with an ultraviolet light, where it waits to go through the filters.

  4. Cascade filtration

    Micro pumps push it through a sediment filter, activated carbon, a NanoCeram® filter and an ultrafiltration membrane, and a mineral cartridge balances its pH.

  5. Cold or hot

    It moves up to a tank with a UV-C lamp and on to two reservoirs: one chills it to 5 to 7 °C and the other heats it to 85 to 95 °C.

What sets it apart

Hot and cold
Cold water at 5 to 7 °C and hot water at 85 to 95 °C, each in its own reservoir. Each temperature has its own switch on the back.
Hot water lock
Hot water only comes out after you press the lock button. Small children should still use it with an adult.
An informative display
It shows the tank level, the room's temperature and humidity, when it's making water and which filter is due.
Ultra-quiet
45 dB at most, with a venturi fan designed to keep the noise down.
Protection sensors
It shuts itself off if it detects a water leak, a refrigerant leak or overheating, and shows the fault code on the display.
Water that keeps moving
Stored water runs back through the filters every few hours to stay fresh, even when nobody pours a glass.
No plumbing, or plumbing
All it needs is an outlet. With its hose kit it also connects to a tap and uses its filters to treat mains water.
Wheels and adjustable feet
It rolls on wheels and levels on its front feet, on a 30 × 44 cm footprint.

Where it makes sense

  • Homes
  • Condos
  • Apartments
  • Offices
  • Front desks
  • Clinics
  • Classrooms

Made for anyone who wants hot and cold drinking water without waiting on the truck or the five-gallon bottle.

What your space needs

We go over this with you before installing. These are the manufacturer's manual requirements.

  • A grounded outlet rated 10 amps or more, used only by the unit. No extension cords or adapters.
  • About 30 cm of clearance from any wall, in a room with good ventilation.
  • A firm, level floor, indoors and where nobody will bump into it.
  • A room at 18 °C or more and 30% humidity or more. It performs best around 27 °C and 60% humidity or more.
  • Stable voltage: if it drops more than 10%, the unit may get noisy or overheat.
  • A day's patience when it's new: it has to stand upright for 24 hours before you plug it in, so the compressor isn't damaged.

Specifications

Water

Maximum output
Up to 20 L (5.3 gal) a day
Standard conditions
26.7 °C and 60% humidity
Integrated tank
11 L (2.9 gallons), with continuous treatment
Cold water
5 to 7 °C
Hot water
85 to 95 °C

Purification

Air filter
Sub-micron barrier: holds back particles smaller than 2.5 microns
Water filters
Sediment, activated carbon, NanoCeram® and a mineral cartridge
Final treatment
Ultrafiltration membrane and UV-C lamp
pH
Balanced with minerals, between 6.5 and 8.5

Electrical

Voltage
120 V / 60 Hz or 230 V / 50 Hz, single phase
Nominal draw
550 W
While heating, at 120 V
Up to 1,200 W
Energy per litre
400 Wh in standard conditions
Protection at 120 V
15 A breaker with GFCI
Refrigerant
R-134a

Operation

Room conditions
From 18 °C and 30% humidity
Noise
45 dB at most
Controls
Touch display with hot water lock

Size

Height × depth × width
115 × 44 × 30 cm
Weight
45 kg (99.2 lb) empty

Maintenance and certifications

Filters
Every 6 months: the air filter and the five water cartridges. The UV lights are not replaced.
Declared certifications
CE, IEC (CB Scheme), Low Voltage Directive 2014/35/EU and Electromagnetic Compatibility Directive 2014/30/EU

Specifications from Watergen's official Genny+ page, completed with its data sheet and manual; where they differ, the official page wins. Real output depends on the temperature and humidity where it runs: it's an estimate, not a guarantee. The manufacturer may change these figures without notice.

How much water would the Watergen Genny+ make at your site?

Tell us where you would install it and what you need it for. We will give you an estimate for that location before you buy.

Message on WhatsApp

Other products

Homes and offices

Altitude T-12

US$5,000

Plus 18% ITBIS

Render of the Altitude T-12 stainless steel atmospheric water generator.

Secure your water independence today with a unit that makes water from the air. This American-built powerhouse, with a stainless steel body and copper piping inside, makes up to 56 litres (15 gallons) a day of ozone-purified, alkaline drinking water, depending on the weather.

Up to 56 L (15 gal) a day26.5 L (7 gal) tankAnnual filter kit

Villas, hotels and restaurants

Altitude T-100

Render of the Altitude T-100 commercial-scale atmospheric water generator.

Meet the T-100, an atmospheric water generator that makes up to 700 litres (185 gallons) of purified water a day, depending on the weather. A steady, sustainable supply drawn from the humidity in the air, ideal for water independence at home or in a commercial establishment.

Up to 700 L (185 gal) a day50 L (13.2 gal) tankIdeal for business

Communities, farms and industry

Altitude T-200

Render of the Altitude T-200 community-scale atmospheric water generator.

Our most powerful commercial unit, making up to 1,380 litres (365 gallons) of purified drinking water a day from the humidity in the air alone, depending on the weather. Built for industrial-scale demand, it's the ideal solution for large facilities, municipalities, agricultural operations and extended disaster response.

Up to 1,380 L (365 gal) a day100 L (26.4 gal) tankOzone box compatible

Homes and businesses

Ozone Water Purification Box

Render of the Altitude Water ozone purification box.

It doesn't make water: it uses ozone to purify the water you already get, before it reaches the tap.

Cistern, well or mainsFits your plumbingQuoted to fit

Maintenance

T-12 Filter Bundle, one year

Render of the one-year filter bundle for the Altitude T-12.

Every filter the T-12 needs for a year, in a single order, so the unit keeps running well.

Carbon and calciteMERV-13 air filter6 months or 2,839 L (750 gal)