Skip to content
← Back to home
Render of the Altitude T-100 commercial-scale atmospheric water generator.

Hotels and buildings

Altitude T-100

The mid scale for high consumption: it produces continuously around the clock, with a 189-liter tank and the same ozone purification system as the whole line.

Message on WhatsApp

From air to glass

The same principle as the T-12, at building scale and running around the clock.

  1. MERV-13 air filter

    Air passes through a MERV-13 filter that traps dust before it enters the unit.

  2. Condensation

    A cold coil turns the humidity in the air into liquid water.

  3. EnviroGuard ozone

    Altitude Water's patented system treats the water with ozone, under software control.

  4. Carbon and calcite

    A carbon block filter and a calcite cartridge, which adds minerals to the water and raises its pH.

  5. 189-litre tank

    The water is stored and ready for the day's use.

What sets it apart

Continuous production
It runs 24 hours a day. The manufacturer states a maximum of 400 litres a day under optimal conditions.
189-litre reserve
A large tank to cover the hours of highest demand.
Single or three phase
It runs on 220 V / 60 Hz, on single-phase or three-phase power.
Touchscreen
It is operated from a touchscreen and is WiFi-compatible.

Where it makes sense

  • Apartment buildings
  • New construction
  • Restaurants
  • Hospitals
  • Farms and greenhouses
  • Boats
  • Homes and condos

Specifications

Water

Maximum output
Up to 400 L in 24 hours*
Tank
189 L
Operation
Continuous, 24 hours

Purification

Air filter
MERV-13
Treatment
Software-controlled EnviroGuard ozone
Water filters
Carbon block and calcite

Electrical

Voltage
220 V / 60 Hz
Phases
Single or three phase

Size and controls

Length × width × height
113 × 74.3 × 157.5 cm
Interface
Touchscreen, WiFi-compatible

Production figures are manufacturer-stated maximums under optimal conditions. Real output is a site-specific estimate that depends on location, temperature and humidity; it is never a guarantee. The equipment performs optimally from 40% relative humidity upward. Puerto Plata averages between 70 and 85% year-round.

Specifications from Altitude Water's sales presentation. The manufacturer may change them without notice; we confirm them when we quote.

How much water would the Altitude T-100 make at your site?

Tell us where you would install it and what you need it for. We will give you an estimate for that location before you buy.

Message on WhatsApp

Other products

Homes and businesses

Altitude T-12

Render of the Altitude T-12 stainless steel atmospheric water generator.

The flagship: cold and room-temperature water with EnviroGuard ozone purification, a stainless steel body and copper piping. It plugs into a standard outlet and keeps going on your generator.

US$5,000, approximately 296,000 DOP

Plus 18% ITBIS · Taxes not included

Up to 15 gal/dayHome and businessSteel and copper

Communities and industry

Altitude T-200

Render of the Altitude T-200 community-scale atmospheric water generator.

The largest scale, for operations that cannot run out of water: it feeds from the grid or from solar power, and its mobile design lets it be relocated and stacked.

Up to 800 L/dayCommunity scaleSolar ready

Existing water systems

Ozone Water Purification Box

Render of the Altitude Water ozone purification box.

It does not make water: it purifies the water you already have. It integrates into your current setup, whether cistern, well or mains, and adds an ozone treatment stage before the water reaches the tap.

Ozone stageFits your systemHome and business

T-12 maintenance

T-12 Filter Bundle, one year

Render of the one-year filter bundle for the Altitude Water T-12.

Every air and water filter a T-12 needs for a year, in a single order: carbon block, calcite and air filters. That keeps the unit producing with the taste and output it had on day one.

One year of filtersAir and waterT-12 only